Herunterladen Diese Seite drucken

elero VariEco Bedienungsanleitung Seite 16

Antrieb für rollladen und textilen sonnenschutz
Vorschau ausblenden Andere Handbücher für VariEco:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Disassembly and disposal | EC declaration of conformity
7
Maintenance
The VariEco is maintenance-free.
8
Repair
If you have any questions, please refer to your specialised
company. Please always state the following information:
• Item number and item designation on the nameplate
• Error type
• Previous and unusual events
• Surrounding circumstances
• Own assumption
9
Manufacturer's address
elero GmbH
Antriebstechnik
Maybachstr. 30
73278 Schlierbach
Deutschland / Germany
Please visit our website if you require a contact outside
Germany.
10
Disassembly and disposal
Dispose of the packaging according to current regulations.
Dispose the product after previous use in accordance with
applicable regulations. Disposal is partially subject to stat-
utory provisions. The goods to be disposed of must only be
delivered to authorised acceptance points.
Environmental information
No unnecessary packaging was used. The packaging can
be easily divided into three material types: Cardboard (box),
Styrofoam (padding) and polyethylene (bag, foam material
protective foil).
The device is made up of materials that can be reused if it
is disassembled by a specialist operation. Please observe
the local provisions on disposal of packaging material and
old devices.
Always expect additional danger that does not occur in
operation during disassembly.
WARNING
Danger of injury due to electric current.
Electric shock possible.
►Physically disconnect power supply lines and discharge
energy storage. Wait for at least 5 minutes after deactiva-
tion for the motor to cool down and the capacitors to lose
their voltage.
►Use suitable, tested and stable climbing aids when per-
forming disassembly work above body height.
►All work at the electrical system must only be performed
by the staff described in the chapter "Safety instructions
for electrical installation".
Scrapping
During the scrapping of the product, the international,
national and regional-specific laws and regulations are to be
complied with.
Please make sure to consider material recyclability, ease of
dismantling, and separability of materials and components
as well as environmental and health hazards during recy-
cling and disposal.
6 | EN
Phone:
+49 7021 9539-0
Fax:
+49 7021 9539-212
info@elero.de
www.elero.com
© elero GmbH
CAUTION
Environmental damage at incorrect disposal
►Electronic scrap and electronic components are subject
to the hazardous waste rules and must only be disposed
of by approved specialist operation.
►Groups of materials such as plastics and metals of vari-
ous kinds are sorted for recycling and disposal process.
Dispose electrical and electronic components
Disposal and recycling of electric and electronic compo-
nents must comply with the applicable national laws and
regulations.
11
Notes on the
EU declaration of conformity
elero GmbH hereby declares that the pipe drive VariEco
complies with the basic prerequisites and the other relevant
provisions of the EU directives. The complete declaration of
conformity can be found in the download area of our web-
site www.elero.com/en/downloads-service/
12
Technical data and dimensions
The indicated technical data are subject to tolerances
(according to the respective applicable standards).

Werbung

loading