Installing The Cable-Management Arm; Routing Cables - Dell PowerEdge 1750 Installationsanleitung

Press the slide release latch at the side of each slide and push the system completely
8
into the rack (see Figure 1-18).
Push in and turn the captive thumbscrews on each side of the front chassis panel to
9
secure the system to the rack.

Installing the Cable-Management Arm

See "Installing the Cable-Management Arm" in "Four-Post Rack Installation."

Routing Cables

See the procedure "Routing Cables" in "Four-Post Rack Installation."
You have completed the installation of the rack kit in a two-post rack.
1-26
Rack Installation Guide