Rack Kit Contents; Two-Post Rack Installation Tasks; Two-Post Rack Kit Components; Flush-Mount Installation - Dell PowerEdge 1750 Installationsanleitung

Rack Kit Contents

The two-post rack kit includes (see Figure 1-12):
• One pair of slide assemblies (two-post)
• One stiffening bracket
• One cable-management arm
• Two stop blocks
• One status-indicator cable assembly
• Ten 12-24 x 0.5-inch pan-head Phillips screws
• Releasable tie wraps (not shown in Figure 1-12)
F i g u r e 1 - 1 2 . Tw o - P o s t R a c k K i t C o m p o n e n t s
slide assemblies (2)
12-24 x 0.5-inch pan-head
Phillips screws (10)

Two-Post Rack Installation Tasks

Installing a two-post rack kit includes the following tasks in their numbered order:
Marking the rack
1
Installing the slide assemblies in the rack
2
• Center-mount installation
•

Flush-mount installation

Installing the system in the rack
3
stiffening bracket
status-indicator cable
cable-management arm
stop blocks (2)
Rack Installation Guide
1-17