Num'axes CANICOM 200 Gebrauchsanleitung Seite 23

Gb - 23
Activate/deactivate the receiver collar
A magnetlocatedin the remote controlis usedto either switchon/off the receivercollar.
- Activate: approach the red area where the magnet is located inside the remote control until coming in
contacton red indicatorlocatedon the receivercollar. holdfor 1 second (ref. Diagram5).the indicator
light will flash in green indicating that CANICOMis on.
Diagram 5
Approach until coming in contact those 2 areas
during 1 second
O
REMOTE CONTROL
COLLAR
- Deactivate: approach the red area where the magnet is located inside the remote control until coming
in contact on red indicator located on the receiver collar. hold for 1 second (ref. Diagram 5). the indicator
light will flash from green to red and then off: the collar is off.
To increase the battery life of the receiver collar. we recommend you deactivate the unit if you are no
longer using your CANICOM 200 for a long period.
Coding of the remote control and receiver collar
Each remote control has its own individual radio operator code. The coding of the remote control with the
receiver collar enables the two units to work together.