IPOTOOLS ACDCTIG 200P Originalbetriebsanleitung Seite 22

OPERATING CONDITIONS AND WORKING ENVIRONMENT
1. Operating conditions:
• Voltage, voltage source: AC 220 V/230V/240V,
Frequency: 50/60Hz,
•
Reliable grounding.
•
2. Work environment
• Relative humidity: not more than 90%,
Ambient temperature: -10 ℃ ~ 40 ℃,
•
The welding site must not contain any harmful gas, chemicals, mould and flammable
•
substances, explosive and corrosive media. The welder must not be subjected to any
vibration or other disturbances,
• Avoid rain and water, work in such circumstances is prohibited.
BEFORE STARTING WORK
• Before welding, it is necessary to read and understand the instructions of use,
Check the machine for any defects or damage,
•
• To ensure the safety of persons and equipment, it is necessary to properly install the
earthing with a 4 mm2 conductor, depending on the requirements of the power supply
system,
• Welding must take place in a dry and well-ventilated area. Objects in the vicinity must
be at least 0.5 m away from the appliance,
Check that all cables are tightly fastened / connected,
•
The appliance must not be moved while the appliance is switched on and welding is
•
in progress.
• The appliance must be maintained, used, and operated by a qualified person,
Distribution board current: less than 40A.
•
INSTRUCTION MANUAL
ACDCTIG-200P Welding machine
7