IPOTOOLS ACDCTIG 200P Originalbetriebsanleitung Seite 20

INSTRUCTION MANUAL
ACDCTIG-200P Welding machine
DANGERS OF ELECTRIC CURRENT
The device can only be connected to the mains with a shielded connection cable. The fuse
must be of the same power as specified in the technical data of the device. The fuse design
must be slow.
Replace damaged torch parts, cable ground, or damaged mains connector immediately.
Replacement of parts on the network, replacement of the connecting cable can only be
performed by an authorized person. Never hold the burner under your arm or otherwise
wrapped around your body. In the event of prolonged work interruptions, switch off the
appliance and close the shielding gas supply.
In the event of an accident, immediately pull out the plug of the connecting cable!
PURPOSE AND USE
The IPOTOOLS ACDCTIG-200P is a welding machine with three welding functions. It can be
used for DC MMA, AC TIG and DC / PULSE TIG welding. Any other use may endanger the
safety of the welder or cause the device to malfunction! Use of the device contrary to these
instructions is not permitted! Damage to the device resulting from use that was not in
accordance with the instructions is not covered by the warranty statement. The machine can
be used to weld several materials in all positions, namely steel, aluminium and aluminium
alloys, stainless steel, titanium, copper and copper alloys. The welding current is stable and
stepless adjustable. The appliance provides a beautiful weld, and the welding itself takes
place quietly and without spattering. The device is small in size, light and thus easy to
transport.
5