Cleanfix RA435 IBC VDE Bedienungsanleitung Seite 35

36 Working methods
Preparation
The area to be cleaned must first be swept clean of coarse, loose dirt. Otherwise,
foreign objects will get caught under the fins of the suction nozzle or the roller brush,
which could result in scratches in the floor covering.
Area cleaning
After you have filled the water tank with fresh water and the correct dosage of
cleaning agent, set the desired working angle of the steering handle (3, Fig. 12 + 13)
by loosening and retightening the locking handle (2). Lower the suction nozzle with
the lever (4) and switch the appliance on with button "B". Use button "C" to activate
the water supply (Fig. 10), which can be regulated using the ball valve (5, Fig. 11).
Press button "D" (Fig. 10) to switch on the suction nozzle, the power of which can be
changed to ECO, NORMAL or BOOST by pressing it several times.
Now start the brush by pressing one of the two red start levers (1, Fig. 12) on the
steering handle to begin cleaning.
1
3
3
4
2
2
13
12
35
www.cleanfix.com 435.042