Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wall mounting / Operation
Alternatively, attach the product to a magnetic surface using the magnets 3 .
● Operation
● Basic settings
□
Press the °C/°F button 7 to switch the temperature's unit of measurement
between Celsius (°C) and Fahrenheit (°F).
The set unit of measurement for the temperature is shown on the °C/°F display 10 .
● MAX/MIN values
The maximum and minimum temperature and air humidity values are saved as of
initial commissioning.
□
Press the MAX/MIN button 8 .
The "MAX" 12 lettering appears on the display. The highest meas
ured values are shown in the display sections for temperature 9
and humidity 15 .
□
Press the MAX/MIN button 8 again as long as the "MAX" lettering is
displayed.
The "MIN" lettering 12 appears on the display. The lowest meas
ured values are displayed in the display sections for temperature
and humidity 15 .
9
□
Press and hold the MAX/MIN button 8 for approx. three seconds to reset
the stored values.
● Temperature and humidity trend
The trend displays for temperature 11 and humidity 13 show you the respective
trends (increasing, constant and decreasing).
● Status display
The status display 16 shows you the current room climate assessment.
Status
Temperature
12
GB/IE/NI
Humidity
Werbung
