Scheppach SCM340 Originalbetriebsanleitung Seite 10

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
Note:
Read through the complete text in the operating manual
before installing and commissioning the device.
This operating manual should help you familiarise
yourself with your power tool and teach you how to
use it for its intended purpose. The operating manual
include important instructions for the safe, proper and
economic operation of the power tool, for avoiding
danger, for minimising repair costs and downtimes and
for increasing the reliability and extending the service
life of the power tool.
In addition to the safety instructions in this operating
manual, you must also observe the regulations
applicable to the operation of the power tool in your
country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work. The power tool may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
10 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Description of the product
1. Suspension device
2. Pole (consisting of 2 parts 2a + 2b)
3. Wing screw
4. Cutting roller
5. Phillips screw
3. Scope of delivery
Item
2a. +2b.
4.
4. Proper use
The product is intended for loosening soil. The
product has 11 blades. The product is not designed for
commercial use or for other areas of use.
5. Safety instructions
• CAUTION! SHARP BLADES! DANGER OF CUTS!
• Do not leave children unattended with the product.
Ensure that children do not play with the product.
The product is not a toy.
• Keep your hands and feet away from the blades.
• Wear sturdy footwear. Do not use the product if
barefoot or wearing open shoes.
• Do not leave the product on the ground with the
blades pointing upwards.
• Place the blade protection cover on the blade roller
when you are not using the product.
6. Technical data
Cutting width
Cut height
Dimensions
Device weight
www.scheppach.com
Quantity Designation
1x Shaft
1x Cutting roller
207 x 47.5 x 16 cm
34 cm
9 cm
approx. 2.1 kg