Numark DJ2GO2 Benutzerhandbuch Seite 61

How do I Script tracks on my Prime 4's Hard-drive
The SSD in your Prime 4 behaves like a normal External Hard-drive. To
access the drive, you need to set the Prime 4 into Controller/USB
Mode. To do so follow the steps below.
Step 1 : Connect a USB cable to the USB B port on the PRIME 4 and
the other end to your computer.
Step 2 : On PRIME 4, hold the VIEW button for 2 seconds to show the
Step 4 : Tap the SOURCE icon.
Step 5 : Tap the computer icon to put the device into controller/USB
Step 6 : Once in controller/USB mode, the drive will be mounted to
Note: The PRIME 4 may continue "searching for the computer" but this
Step 7 : Once mounted, you will now see the hard drive as an available
media device in Engine Prime and SoundSwitch
Where can I learn more about SoundSwitch?
soundswitch.com/gettingstarted
facebook.com/soundswitchdj
instgram.com/soundswitch_dj
Email Customer Support:
General FAQ's
Menu.
mode.
your computer.
is normal.
Web Support
support.soundswitch.com
Social Media
support@soundswitch.com
26