Numark DJ2GO2 Benutzerhandbuch Seite 37

DMX Addressing
SoundSwitch allows control of two 512 channel DMX Universes.
The DMX Address is where in the DMX Universe the fixture is
patched. For example, if you have a RGB LED Wash running in 3 Chn
Mode, SoundSwitch needs to know where it is patched.
You can set the DMX Address to any number between 1 and 512.
If you set the DMX Address on the fixture to 1, and the fixture is in 3
Chn Mode, then the fixture will use channels 1,2 and 3,
however, you only need to set the start address.
So the Address for this fixture is 1.
If you set the DMX Address on the fixture to 10 and the fixture is set
to 6 Chn Mode, the fixture will use channels 10,11,12,13,14 and 15.
Again, the DMX Address is 10
Below is an image of the SoundSwitch DMX Universe Map. As you
can see, there are two fixtures "Patched" in the DMX Universe and
you can see how many channels each fixture is using and what the
DMX Address is.
3