Numark DJ2GO2 Benutzerhandbuch Seite 44

Connecting Hardware:
Step 1 : Connect your fixtures to power and power them on.
Step 2 : Connect a DMX cable from the DMX interface to the
first fixture and continue to connect the cables from each light
to the next. This is called "Daisy Chaining".
Step 3 : Set the fixtures into DMX Mode and Select a DMX Mode
and Set the DMX Address.
Now that your fixtures are powered on and Daisy Chained set
the DMX Mode and DMX Address on the fixtures and patch the
fixtures in SoundSwitch
9