Numark DJ2GO2 Benutzerhandbuch Seite 43

Connecting Hardware:
Step 1: Connect your SoundSwitch or Third Party Interface.
Connect your DMX interface to a spare USB port or Powered Hub.
If SoundSwitch does not recognize your hardware right away, leave
the hardware connected and restart SoundSwitch.
Step 2: Check the Hardware Settings.
Open the Preferences but clicking on the Preferences icon
and select the "Hardware Tab". Check that your hardware is listed
and make sure the correct universe is assigned.
In most cases you will want to select assign Universe One to your
hardware.
Done!
8