Numark DJ2GO2 Benutzerhandbuch Seite 51

If you have moving fixtures in your rig, it's time to learn how to
In the Master Track you can see that there are small Cues, these
You can name and adjust Position Cues and Position Cue Folders
using the Positions Menu on the left hand side as shown below.
To add Pan and Tilt settings to a Position Cue, double click on a
Now you can use the X/Y Control to point the Movers in any
Pan/Tilt
control
Step 3 : Controlling Moving Fixtures
control the Pan and Tilt.
are called Position Cues.
Position Cue in the Positions Menu to bring up the
Position Cues Window.
direction you like.
Testing
16
Fixture
Selection
Position
Selection