Numark DJ2GO2 Benutzerhandbuch Seite 49

Setting Up Philips HUE Lighting
SoundSwitch 2.3 adds support for Philips Hue lights. This allows
basic lighting effects from the Main Track to be displayed on all
To get started, make sure your Philips HUE Bridge is connected to
power, and using an ethernet cable connect the bridge to your
network router. Also make sure you have setup an Entertainment
Area in the Philips HUE app & your lights are assigned to an
Connect your computer to the same wired or WIFI network used to
connect your Philips HUE Bridge.
Download and install the Philips HUE app on your smartphone.
Proceed through the Philips HUE setup guide and be sure to set up
an Entertainment Area inside the Philips HUE app.
Open SoundSwitch and enter Edit Mode.
Select Preferences Icon in the top right-hand corner of the screen:
Philips HUE lights.
Entertainment Area.
Then select the Hardware tab
13