Numark DJ2GO2 Benutzerhandbuch Seite 56

Step 5 : Switching to Performance Mode
Connect the Prime 4, 2 or GO or X1850 to your computer using an
Ethernet Cable If you are using the Media Players, also connect these to
Open the Preferences in SoundSwitch and select Engine OS, then select
ether of the Player + Mixer options or the All-in-One depending on which
In SoundSwitch, navigate to the File Menu and Select "Switch Modes" and
select "Performance Mode" and select the Venue used to set your lights.
Switch to using your Engine OS Hardware, load a song on each Deck and
If the connection is successful you will see a Blue Connection Status
Indicator showing next to the Engine OS in the top left hand corner of the
* Depending on setup individual setups, you may need to disconnected your
computer from WIFI in order to secure a connection with the Engine OS Hardware
Testing
Engine Prime Hardware
the X1850 using Ethernet Cables.
hardware you own.
start mixing.
screen.
21