Numark DJ2GO2 Benutzerhandbuch Seite 48

Testing
Now its time to test to see if everything is setup correctly.
To do so, open an Autoloop and see if this plays back correctly.
Step 1 : Open an Autoloop
To open an Autoloop, select the icon in the bottom right hand
corner of the screen to display the Autoloop Banks and open the
first Autoloop called "Red" in "Bank 1 : Dance"
If all is working and setup correctly, all of your lights will be
displaying Red and if you have moving heads, these will be pointing
straight up.
Step 2 : Customize the Autoloop
Selecting & Changing Colors:
Make a selection in the Master Track, Right Click then select
"Change Color". Choose a new color and Press Apply.
Now set the play-head at the beginning of the Autoloop by double
clicking on the Master Track or waveform and press
Space-bar to start playing the Autoloop.
The lights should start pulsing and will change color in time with
changes in the color track. Don't worry If your moving heads are
not moving, that's fine, we will work on Movement next.
15