Operating - Vevor R0800C Bedienungsanleitung

OPERATING

WARNING!
Excessive pressure on machine done not necessarily lead the high
working power and speed; On the contrary, it increases the wear on the
grinding point can damage the die grinder.
NOTE:
The switch on this tools is fitted with a locking device, allowing the tool to
be operated for long periods of time without interruptions. Before inserting
the unlocked position.
SWITCH ACTION
- Hold the tool firmly with both hands when starting the tool.
- Start the tool by pushing the switch to the position of "I" then pressing
down switch, it will be locked.
- Pressing the switch which "O" of the housing when the stop the machine,
the switch will be position of unblocked.
DIMMER
Dimmer can be variable in 6 levels.by adjusting speed controller, grinding
and sanding operation can be well done.
WARNING!
If the tool is operated continuously at low speeds for a long time, the motor
will get overloaded, resulting in tool malfunction. The speed adjusting dial
can be turned only as far as 28000 and back to 12000. Do not force it past
28000 or 12000, or the speed adjusting function may no longer work.
— 10 —