Troubleshooting - Quick Tools Qu959D+ Bedienungsanleitung

7. Check the holder⑤ for damage.
8. Detach heater insert③ from plug④.
9. Remove heating element③.
10. Install new heating element.
11. Insert plug into holder and slide steel pipe over it.
12. connect green ground wire and screw on.
13. push everything back into the handle and fasten with 3 screws.
14. perform the following test:
15. Perform calibration.

2.9. Troubleshooting

H-E Indicates that there is a problem with the heater and the heater needs
to be checked or replaced.
S-E Indicates that there is a problem with the sensor and the sensor
needs to be checked or replaced.
ERR Indicates that the fan is faulty and needs to be checked or replaced.
We hope you enjoy using your QUICK HOT AIR STATION and are always
interested in your suggestions for improvements.
Please also contact us if you have any problems or questions about your
application.
Your Bräunlich GmbH team
8
USER MANUAL