Herunterladen Diese Seite drucken

Cochlear Baha Attract System Benutzerhandbuch Seite 4

Teil b
Vorschau ausblenden Andere Handbücher für Baha Attract System:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Note
During the initial period of use it is
recommended to gradually increase the
time of use of the SP magnet to allow
the skin to adapt to the pressure from
the SP magnet. If any irritation is noted
the SP magnet should be removed in
order to let the skin rest for a while. If
discomfort and/or skin irritation persist,
contact your hearing care professional.
To ensure good retention the arrow
on the SP magnet should always face
upwards and you should try to limit
the amount of hair underneath the SP
magnet. See Fig. 3.
To avoid feedback (whistling), ensure
that the sound processor is not
touching any other items, such as
glasses or a hat.
It is recommended to wear a safety line
attached to the sound processor to
reduce the risk of loss or damage.
Caring for your SP magnet
Keep your SP magnet clean by wiping it with
an alcohol-free wipe. Do not use running
water to clean your SP magnet.
Clean the SP magnet coupling using a soft
brush.
It is recommended to wear the SP magnet
with the soft pad attached for maximum
wearing comfort.
4
Changing soft pads
You should change the SP magnet soft pad
regularly. You should replace the soft pad if
you observe the following:
An accumulation of dirt or moisture on
the soft pad that cannot be wiped off.
The soft pad appears worn-out or
damaged.
You experience a gradual deterioration
in wearing comfort (if changing the soft
pad does not help please contact your
hearing care professional).
Contact your hearing care professional to
obtain new soft pads.
See Fig. 5–8.
5. Remove the soft pad from the SP
magnet, by lifting and gripping the
unglued portion of the soft material,
and then slowly release the soft pad
from the SP magnet.
Make sure that the adhesive remains are
completely removed from the SP magnet.
6. Select a new soft pad and remove the
cover sheet to expose the adhesive.
7. Attach the soft pad to the SP magnet.
Make sure that the soft pad is centralised
and covers the entire SP magnet surface.
8. Remove the remaining cover sheet from
the soft pad before you start wearing
the SP magnet.
Cochlear Baha Attract System user manual part B

Werbung

loading