Mittelmann RsqTec TURTLE FrameX Gebrauchsanleitung Und Prüfbuch Seite 17

5
6
7
8
9
Mittelmann Sicherheitstechnik GmbH & Co. KG - Bessemerstrasse 25 - DE-42551 Velbert
Phone : +49 (0)2051 / 91219-00 - Fax : +49 (0)2051 / 91219-19 - Email : info@mittelmann.com
- 3 -
Position the shoulder strap:
Guide over the head and place on
the chest.
Connect the buckles:
Connect the shoulder strap in front
of the chest to the side chest straps.
Tightening:
Tighten the straps slightly (do not
constrict).
Check breathing:
Ensure freedom of movement of the
chest for breathing.
Check the head position: Check the
head position from step 2.
Position the head fixation: Position
the non-slip fabric head fixation on
the forehead/helmet.
Fasten the side straps: Fasten the
adjustable straps at the side.
Medium adjustment: Adjust the
flexible black strap in the centre
behind the head.
Apply lashing straps:
Connect the fasteners crosswise.
Tighten:
Tighten the straps (not constricting),
bring the protective tray into shape
Position the suspension:
Guide over the person with the
headband.
Connect the buckles: Connect the
side buckles to the rescue harness
of the stretcher.
Check alignment:
Black elasticated loops on the
outside, blue straps must not be
twisted.
Use the elasticated strap loops:
Pass your hands through the loops.
Hook in the arms:
Insert the arms into the elasticated
strap loops.
Check position:
Align the loops on the blue side
straps towards the outside.