Mittelmann RsqTec TURTLE FrameX Gebrauchsanleitung Und Prüfbuch Seite 16

6. Step by step instructions - RsqTec TURTLE
Step
1
2
3
4
Mittelmann Sicherheitstechnik GmbH & Co. KG - Bessemerstrasse 25 - DE-42551 Velbert
Phone : +49 (0)2051 / 91219-00 - Fax : +49 (0)2051 / 91219-19 - Email : info@mittelmann.com
- 2 -
FrameX
Picture
Description of the
Open the plug-in fasteners:
Fully open all plug-in fasteners on
the appliance.
Position the straps:
Place all straps to the sides so that
they are not in the way.
Insert the leg support:
Insert the adaptive leg support into
the square tube of the rescue
stretcher.
Locking:
Lock the leg support with the
integrated locking system.
Subsequent attachment: Leg
support can also be attached during
transport.
Positioning Person:
Carefully lay the injured person on
their back on the rescue stretcher.
Ensure that the top of the person's
head is flush with the upper edge of
the protective tray.
Pull the belt through:
Guide the long side of the belt
under the respective thigh from the
outside to the inside.
Lay the loops:
Place around the leg at the crotch.
Connect:
Allow the plug-in fasteners to
engage audibly and tactilely.
Position the padding pads on the
push-fit fasteners and between the
legs
Pull tight:
Tighten the straps (not constricting)
and maintain the person's position.