IPOTOOLS MIG-225SYN Betriebsanleitung Seite 27

MIG-225SYN
PURPOSE AND USE
IPOTOOLS MIG MAG inverter welding machine MIG-225SYN is a welding machine with two welding
functions. You can use it for MMA / E-Hand DC + & DC-; Use MIG / MAG DC + and TIG. Welding in TIG
mode is only possible with LIFT TIG ignition; a TIG torch is required for this, which is not included in the
scope of delivery. Any other use can endanger the welder's safety or damage the device! This device
may only be used in accordance with these operating instructions! The guarantee does not cover
damage to the device resulting from improper use or which does not comply with the instructions in the
guaranteed declaration. It is possible to weld multiple materials in all positions, namely steel, aluminium
and aluminium alloys, stainless steel. The welding current is stable and stepless adjustable. The device
creates a beautiful weld seam, with the welding process running quietly and without splashing. The
device is small, light and therefore easy to carry.
Type
Welding procedures
Connection voltage
Housing protection
Overload display
Cooling
Magnetic valve
MIG Duty Cycle
MMA Duty Cycle
Welding current MIG
Welding Wire Ø MIG
Wire feed
Max. welding wire diameter Ø
MMA electrode diameter
Dimensions
Weight
Note: The above parameters may change with future machine improvements!
TECHNICAL INFORMATION
MIG MAG Inverter Welding Machine MIG-225SYN
DC MIG/MAG, MMA, TIG (LIFT TIG)
230V 1-Phase / Frequency: 50/60Hz
200mm / Wire Ø MIG: 0,8/1,0mm
0,6mm / 0,8mm / 0,9mm / 1,0mm
5
IP21S
Yes
Fan
Yes
225A – 60% / 175A – 100%
225A – 60% / 175A – 100%
40-225A / MMA: 40-225A
2 Wheels (1 with drive)
1-5mm
450x220x350mm
16 kg