Zendure SolarFlow 800 Pro Bedienungsanleitung Seite 22

EN
2.Consumption
Display the type of electricity consumption data currently being used to control the output of the energy
storage system.
As shown in the figure, the current system has not configured any sensors (Smart Appliances), the energy
system automatically outputs according to the basic load plan. If the system is connected to a Smart Appliance,
this will display the monitored values of the devices.
3.Device status
Display the energy storage devices within the current energy system, as well as their charging and discharging
status. Click to view the detailed status of the energy storage devices.
Charging\Discharging Bypass mode
As shown in the figure, when the battery is fully discharged or fully charged, the energy storage battery will
enter bypass mode, and the input energy from the solar panels will be directly output to the home.
If you want to allow the system to continue charging or discharging, you only need to go to the system settings
and adjust the limit of battery charging and discharging according to your own usage needs.
21