Zendure SolarFlow 800 Pro Bedienungsanleitung Seite 18

EN
8.3 How to use SolarFlow 800 Pro
8.3.1 Charge/Discharge Status
•Charging: The battery is in charging status.
•Discharging: The battery is in discharging status.
•Standby: No input/output, device standby.
Bypass: The battery is fully charged or charged to SOC limit or
abnormal, and the solar energy directly supplies power to the home
8.3.2 Energy Flow
Click to view the energy flow diagram.
8.3.3 Product Preview Image
8.3.4 Total Remaining Battery Capacity
Displays the total remaining battery capacity; click to view the
remaining capacity of different batteries
8.3.5 Add to HEMS Swicth
1.Turn on
When turned on, the device will be controlled by the HEMS. Manual
control is not available, you can't use On-grid Settings、Battery Setting、
Grid-connected Standards、Power Distribution Dtrategy
2.Turn off
When turned off, the device will be removed from system control. You can
use all the manual settings.
3.Design Goals:
•Avoid conflicts between the HEMS and manual control at the same time.
•Let you keep the ability to adjust device settings themselves.
8.3.6 Device Real-time Monitoring
1. Input(PV) 2. Battery
Real-time total solar The battery pack as
input power, click a whole, real-time
to view the real- data on discharge or
time power of each charge power.
individual solar panel.
3. Output(To Home)
The real-time AC
output power of
SolarFlow 800.
17
4.Output(Off-grid 5.Input(From Grid\
Outlet) Roof Solar System)
The real-time AC The real-time AC
output power of input power of
SolarFlow 800 Pro's SolarFlow 800 Pro.
off-grid outlet.