Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
8.4 How to use Home Energy Management System
8.4.1 How to Create HEMS
• Create on the Home interface.
1. Create System: Click on "Create System".
2. Create Energy System: Read the system introduction, and click "Start" to enter the next interface.
3. Select a region/country: Follow the instructions to select the national standard for deviceinstallation in your
country, and click "Next step" to enter the next interface.
4.Select Device: Select the device. To create a system, there must be an energy storage device that supports
the system. Currently, SolarFlow 800 Pro\SolarFlow 2400 AC is supported. Previous device models are not
supported temporarily, but you can click "Support Device" to view. If there are Meters or Plugs in your home,
you can add them to the system synchronously. Click "Next step" to enter the next interface.
5.Safety Settings: Set the maximum output power and maximum input power allowed by the system to ensure
that the system operates at a safe value. After completion, click "Next Step" to enter the next interface.
6.Base Load Settings: The charging and discharging power plan from 0:00 to 24:00. If the user does not set
it, it will be a constant power output of 200W. When the system does not have a Smart Meter or Smart
Appliances, it will input and output according to the power set by the basic load.
As shown in the figure, it is set to charge 200W from the grid from 08:00 to 15:00.
If the system is not bound to a Smart Meter or Smart Appliances, the system will maintain a discharge action
of 200W during the time period from 00:00 to 08:00, maintain a charge action of 200W during the time period
from 08:00 to 15:00, and maintain a discharge action of 200W during the time period from 15:00 to 24:00.
19
Werbung
