Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
4. Important Tips
√
Grid-tied Regulation:The solar PV system is grid-tied. Please check if it is allowed in your area.
√
√
√
√
Protect from Direct Sunlight: Ensure that the SolarFlow 800 Pro is placed in a shaded area to
avoid rapid temperature increases that could affect performance.
Accessory Check: Verify the necessary accessories prior to installation, as some may need to
be purchased separately.
€
Download the Zendure App: After installation, download the Zendure app to unlock additional
smart features and remote control options.
Grid Connection Time: Once installation and the initial startup are complete, allow
approximately 1 minute for the SolarFlow 800 Pro to connect to the grid.
Set Safe AC Output: Use the Zendure app to configure the AC output for home use. Ensure
the output complies with your country or region's safety power limits to prevent overloads.
!
Shutdown Procedure: Before removing the SolarFlow 800 Pro, press and hold the button for 6
seconds to turn off the device, and disconnect all power cables for safety.
Optimal Operating Conditions: It is recommended to use this product in environments ranging
from 15℃ to 30℃ , away from water, heat sources, or sharp objects that could cause damage.
Long-Term Storage: For long-term storage, discharge the battery to 30% and recharge it
to 60% every 3 months. If it drops below 1% after use, recharge it to 60% before storing.
60%
Prolonged low power can cause irreversible damage and shorten the battery's lifespan.
No Disassembly: Do not attempt to disassemble the product. For repairs or servicing, consult
official Zendure channels. Improper handling could pose risks of fire or personal injury.
5%
Low SOC Protection: The battery features a 5% discharge limit to prevent excessive
discharging of the AB3000S, thus extending its lifespan.
5. What's in the Box
SolarFlow 800 Pro *1
2
X
2
X
Bracket Kite
Before unpacking, check the packaging for any damage (e.g., holes or cracks) . If damaged , do not unpack
and contact Zendure service team immediately.
After unpacking, verify that all items are intact, complete. If anything is missing or damaged, contact
customer service.
User Manual
Wrench for Removing Solar
Connector and AC Connector*1
5
3m 10A AC Power Cable
Werbung
