Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NL
Alternatively, connect the SolarFlow 800 Pro to a home load using an AC cable with a Schuko plug. For critical
loads, the off-grid socket supports Emergency Power Supply (EPS), which automatically switches the power
supply from the grid to the SolarFlow 800 Pro within 20ms.
Please confirm that the microinverter specifications, such as maximum output voltage and short circuit current, fall
within the operational range of the off-grid AC socket's input wattage.
The off-grid socket can output a continuous power of 1000W and a peak power of 1400W for 200ms. Ensure that
the off-grid home load does not exceed 1000W for proper operation.
7.3.6 Productplaatsing en kabelbeheer
The SolarFlow 800 Pro should be positioned such that the solar and AC
cables can run straight down without significant bending.
7.4 Meerdere SolarFlow 800 Pro sets installeren
1. Multiple SolarFlow 800 Pro sets can be installed on a single phase/installed separately across the three
individual phases of a three-phase system.
2. Use the Zendure app to configure the AC power output to the grid, ensuring it does not exceed the safety
limits required by your country or region.
Installation in single-phase electricity syste
Elektriciteitsmeter
Raster
Installatie in een driefasensysteem
Elektriciteitsmeter
Raster
Aardlekschakelaar
Verdelerskast
Aardlekschakelaar
Aardlekschakelaar
Aardlekschakelaar
Aardlekschakelaar
Verdelerskast
Aardlekschakelaar
Keuken
Woonkamer
165
Balkon
Fase A
Fase B
Fase B
Werbung
