Cable Managemet; Connect To The Add-On Batteries - Zendure Solarflow 800 Pro Bedienungsanleitung

EN

7.3.1 Cable Managemet

The SolarFlow 800 should be positioned such that the solar and AC cables can run straight down without
significant bending.

7.3.2 Connect to the Add-on Batteries

Remove the silicone protective cover from the battery terminals on the SolarFlow 800 Pro and Add-on Batteries (sold
separately).
Connect the Add-on Batteries to the SolarFlow 800 Pro by stacking them underneath, ensuring the battery cable
terminals lock into place.
A single SolarFlow 800 Pro can be connected up to 5 AB1000/AB2000 series batteries, which can maximumly reach to
11.52kWh capacity.
• Do not disconnect them during the charging/discharging process.
• Do not touch the metal pins of the ports with your hands or other objects. Gently clean them with a dry cloth when
necessary.
• It is recommended to use the brackets and screws provided with the battery packs to securely fix the SolarFlow 800
Pro on the top and ensure stability.
11