Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Alternatively, connect the SolarFlow 800 Pro to a home load using an AC cable with a Schuko plug. For critical
loads, the off-grid socket supports Emergency Power Supply (EPS), which automatically switches the power
supply from the grid to the SolarFlow 800 Pro within 20ms.
Please confirm that the microinverter specifications, such as maximum output voltage and short circuit current, fall
within the operational range of the off-grid AC socket's input wattage.
The off-grid socket can output a continuous power of 1000W and a peak power of 1400W for 200ms. Ensure that
the off-grid home load does not exceed 1000W for proper operation.
7.3.6 Product Placement and Cable Management
The SolarFlow 800 Pro should be positioned such that the solar and AC
cables can run straight down without significant bending.
7.4 Installing Multiple SolarFlow 800 Pro Sets
1. Multiple SolarFlow 800 Pro sets can be installed on a single phase/installed separately across the three
individual phases of a three-phase system.
2. Use the Zendure app to configure the AC power output to the grid, ensuring it does not exceed the safety
limits required by your country or region.
Installation in single-phase electricity system
Electric Meter
Distribution Box
Grid
Installation in three-phase electricity system
Electric Meter
Grid
Circuit Breaker
Circuit Breaker
Circuit Breaker
Circuit Breaker
Distribution Box
Circuit Breaker
15
Kitchen
Living room
Balcony
Phase A
Phase B
Phase B
Werbung
