Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The water pressure and temperature, the variations of the mains supply and the quantity
of dishes can change the consumption values.
SELECT AND START A WASHING PROGRAMME
Starting the washing programme
1. Close the appliance door.
2. Activate the appliance.
3. Set the washing programme and functions.
4. Press the start touchpad, the countdown of the delay start or the washing pro-
gramme starts automatically.
• The start of the appliance does not automatically occur if the salt container and
the rinse aid dispenser are empty. The related messages show in the display. Press
again the start touchpad, the countdown of the delay start or the washing pro-
gramme starts.
• When the countdown of the delay start is completed, the washing programme
starts automatically.
The opening of the appliance door interrupts the countdown of the delay start. When
you close the door, the countdown continues from the point of interruption.
Cancelling the delay start
1. Press the start touchpad.
2. Follow the indications in the display to cancel the delay start.
3. Press the start touchpad. The washing programme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
Cancelling the washing programme
If the washing programme has not started, you can change the selection.
To change the selection while the washing programme operates, it is necessary to cancel
the programme.
1. Press the start touchpad.
2. Follow the indications in the display to cancel the washing programme.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing programme.
End of the washing programme
When the washing programme is completed, an intermittent acoustic signal sounds and
the display shows a message.
Select and start a washing programme
19
Werbung
Kapitel
Inhaltsverzeichnis
