Adjust The Rinse Aid Dosage; Multitab Function; Loading Cutlery And Dishes - AEG Electrolux FAVORIT 99009 Benutzerinformation

Adjust the rinse aid dosage

Factory set: position 3.
You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (high-
est dosage).
Turn the rinse aid selector

MULTITAB FUNCTION

The multitab function is for combi detergent tablets.
These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of
tablets can contain other agents.
Be sure that these tablets are applicable for the water hardness in your area (refer to the
instructions on the packaging of the products).
The multitab function deactivates the flow of rinse aid and salt.
The multitab function deactivates the salt and the rinse aid messages.
The programme duration can increase if you use the multitab function.
Activate or deactivate the multitab function before the start of a washing programme.
You cannot activate or deactivate the function when a washing programme operates.
To activate the multitab function
1. Open the menu option.
2. Go to Multitab and activate the multitab function.
• When you activate the multitab function, it stays on until you deactivate it.
3. Press the OK touchpad.
4. Press the return touchpad to close the menu option.
To deactivate the multitab function and use separately detergent, salt and rinse aid
1. Open the menu option.
2. Go to Multitab and deactivate the multitab function.
3. Press the OK touchpad.
4. Press the return touchpad to close the menu option.
5. Fill the salt container and the rinse aid dispenser.
6. Adjust the water hardness to the highest level.
7. Start a washing programme without dishes.
8. When the washing programme is completed, adjust the water softener to the water
hardness in your area.
9. Adjust the quantity of rinse aid.

LOADING CUTLERY AND DISHES

Refer to the leaflet 'Examples of ProClean loads'.
4
to increase or decrease the dosage.
Multitab function
15