Setting And Starting A Washing Programme; Interrupting A Washing Programme; Cancelling A Washing Programme; Setting And Starting A Washing Programme With Delay Start - AEG Electrolux FAVORIT EXPRESS VI Benutzerinformation

20

Setting and starting a washing programme

Setting and starting a washing programme
Set the options before the start of a washing programme. You cannot set an option when
a washing programme operates. If it is necessary to set an option, cancel the washing
programme.
Set the washing programme with the door ajar. The washing programme only starts after
you close the door. Until then it is possible to modify the settings.
Do these steps to set and start a washing programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press one of the programme selection buttons. Refer to the chapter 'Washing pro-
grammes'.
– The programme number shows in the digital display.
4. Close the door.
– The washing programme starts.
When the washing programme operates, you cannot change the programme. Cancel the
washing programme.
WARNING!
Only interrupt or cancel a washing programme if necessary.
CAUTION!
Open the door carefully. Hot steam can come free.

Interrupting a washing programme

Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interruption.

Cancelling a washing programme

1. Press and hold function buttons B and C until the digital display shows two horizontal
bars.
After you cancel the programme, you can:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you set a new washing programme.

Setting and starting a washing programme with delay start

1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the digital display shows the necessary delay start of
the washing programme.
4. Close the door.
– The countdown of the delay start starts.