Cancelling A Washing Programme; Interrupting A Washing Programme; Setting And Starting A Washing Programme With Delay Start; End Of The Washing Programme - AEG Electrolux Favorit 52850 Benutzerinformation

CAUTION!
Open the door carefully. Hot steam can come free.

Cancelling a washing programme

1. Press and hold function buttons B and C until all the programme lights come on.
2. Release function buttons B and C to cancel the washing programme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you set a new washing programme.

Interrupting a washing programme

Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interruption.

Setting and starting a washing programme with delay start

1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the display shows on flashing the necessary delay
start of the washing programme.
– The delay start indicator light comes on.
4. Close the door.
– The number on the display comes on with fixed light.
– The countdown of the delay start starts.
– The countdown of the delay start decreases with steps of 1 hour.
– When the countdown is completed, the washing programme starts automatically.
Do not open the door during the countdown to prevent interruption of the countdown.
When you close the door again, the countdown continues from the point of interruption.
Cancelling a delay start:
1. Press and hold function buttons B and C until all the programme lights come on.
– When you cancel a delay start, you also cancel the washing programme.
2. Set a new washing programme.
You can select the washing programme and delay start also with the door closed. When
you press a programme button you have only 3 seconds to select a different washing
programme or a delay start. After these 3 seconds, the selected programme starts auto-
matically.

End of the washing programme

Switch off the appliance in these conditions:
• The appliance stops automatically.
• The display shows 0.
• The end-of-programme indicator light comes on.
Setting and starting a washing programme
35