Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interruption.
Cancelling a washing programme
1. Press and hold the cancel button until all programme indicator lights come on.
2. Release the cancel button.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you set a new washing programme.
Setting and starting a washing programme with delay start
1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the display shows on flashing the necessary delay
start of the washing programme.
– The related indicator light comes on.
4. Close the door.
– The number on the display comes on with fixed light.
– The countdown of the delay start starts.
– The countdown of the delay start decreases with steps of 1 hour.
– When the countdown is completed, the washing programme starts automatically.
Do not open the door during the countdown to prevent interruption of the countdown.
When you close the door again, the countdown continues from the point of interruption.
Cancelling a delay start
1. Press and hold the cancel button until all programme indicator lights come on.
2. Release the cancel button. When you cancel a delay start, you also cancel the washing
programme.
3. Set a new washing programme.
End of the washing programme
• The appliance stops automatically.
• The audible signals for the end of the programme operate.
• The display shows 0.
• The indicator light of the ended programme stays on.
1. Switch off the appliance.
2. Open the door.
3. For better drying results, keep the door ajar for some minutes before you remove the
dishes.
Let the dishes cool down before you remove them from the appliance. Hot dishes are easily
damaged.
Setting and starting a washing programme
19
Werbung
Kapitel
Inhaltsverzeichnis
