Select And Start A Washing Programme; Starting The Washing Programme Without Delay Start; Starting The Washing Programme With Delay Start - AEG Electrolux FAVORIT ÖKOXXL Benutzerinformation

Programme
1) The display shows the programme time.
The water pressure and temperature, the variations of the mains supply and the quantity
of dishes can change the consumption values.

SELECT AND START A WASHING PROGRAMME

Starting the washing programme without delay start

1. Close the appliance door.
2. Activate the appliance.
3. Make sure that the appliance is in setting mode.
4. Set the washing programme.
• The related programme indicator comes on.
• The programme time flashes in the display.
• The phase indicators of the set washing programme come on.
5. If necessary, set the extra-hygiene or ÖKO PLUS function.
• The selection of these functions must always occur after the set of the washing
programme.
6. Press the Start touchpad, the washing programme starts automatically.
• The phase indicators go off but the indicator of the phase in operation stays on.

Starting the washing programme with delay start

1. Close the appliance door.
2. Activate the appliance.
3. Make sure that the appliance is in setting mode.
4. Set the washing programme and functions.
5. Press the Delay touchpad again and again until the display shows the time of the
delay start.
• The time of the delay start flashes in the display.
• The delay indicator is on.
6. Press the Start touchpad, the countdown starts automatically.
• The delay start time flashes no more in the display.
• The phase indicators of the set washing programme go off.
• When the countdown is completed, the washing programme starts automatically.
1)
1,3 - 1,5
0,8 - 0,9
0,1
Select and start a washing programme
Energy (kWh) Water (litre)
14 - 15
11 - 12
4
17