Endress+Hauser RIA452 Betriebsanleitung Seite 95

RIA452
4.2.2 Connecting external sensors
!
Note!
Active and passive sensors with analog, TC, resistance and RTD sensors can be attached to the
device.
Depending on the type of signal of the sensor in question, the terminals can be freely selected.
Current input 0/4 to 20 mA
Fig. 7: Connection of the two-wire sensor to the current input 0/4 to 20 mA
Universal input
Fig. 8: Connection of the four-wire sensor, transmitter power supply and universal input
Endress+Hauser
Wiring
G09-RIA452xx-04-10-xx-en-001
G09-RIA452xx-04-10-xx-en-003
95