Beko OIC 21000 Gebrauchsanleitung Seite 10

Installation
Product must be installed by a qualified person in
accordance with the regulationsin force.The
manufacturer s hallnot be heldresponsible for
damagesarisingfrom procedures carriedout by
unauthorizedpersons which may also void the
warran
Preparation of locationandelectrical
i
installationfor the product ISunder
customer's responsibility,
DANGER:
he product must be installed in
accordancewith all local gas and/or
electrical regulations.
DANGER:
Priorto installation, v isuallycheckif the
producthasanydefectson it. If so, do
not have it installed.
Damaged productscauserisksfor your
safety.
Before installation
Theapplianceis intendedfor installationin
commercially availablekitchencabinets.A safety
distancemust be left betweenthe applianceand
the kitchen walls and furniture. See figure (values
in mm).
Surfaces, synthetic laminates and adhesives
usedmustbe heat resistant(100 oc
minimum).
Kitchen cabinets must be set level and fixed.
If there is a drawer beneath the oven, a
shelf must be installed between oven and
drawer.
1 0/EN
• Carry the appliance with at least two
ersons.
Do not install the appliance next to
i
refrigerators or freezers. T heheatemitted
by the appliancewill lead to an increased
energyconsumption of coolingappliances.
he door and/or handle must not be used
i
or lifting or moving the appliance.
If the appliance has wire handles, push the
i
handles back into the side walls after
movingtheappliance.