Siemens HiPath 3000 Servicehandbuch Seite 1120

2.1.2.3 optiPoint 410/420 V5 R3
Application Function
H.323 (oP410) General term for H.323 functions
H.323 Call Signaling
.
(oP410)
active Voice over IP
H.323 Call Signaling
. (oP410)
passive Voice over IP
H.323 Payload Transport
. (oP4x0 at H2k/H3k)
active Voice over IP
H.323 Payload Transport
. (oP4x0 at H2k/H3k)
passive Voice over IP
H.323 Payload Transport
. (oP4x0 at H4k)
active Voice over IP
H.323 Payload Transport
. (oP4x0 at H4k)
passive Voice over IP
HFA (oP410) Hicom Feature Access
CorNet TC Logon
. (oP600) CorNet TC
Logon Port
OAM (oP410 HFA) Administration of optiPoint HFA devices
DLS Workpoint Interface
(client sided) workpoint
. sided DLS
Communication interface
workpoints
FTP_Server_Control
.
(oP410) FTP-Server
HTTPS_Server (Phones)
. Secure Embedded Web
Server
HTTP_Server (Phones)
.
Web Interface
IP-Config (Phones) IP
.
Configuration Services
SNMP (SET/GET)
. (Phones) SNMP
SET/GET-Functionality
SNMP Trap (oP410)
.
SNMP Trap function
th
Issue: 18 April 2007
Siemens Enterprise Communications GmbH & Co KG
M- T-
Type A-Prot.
Prot. Prot.
H.323
client --- TCP
(H.225-
Q.931)
H.323
server (H.225- --- TCP
Q.931)
client RTP_RTCP --- UDP
server RTP_RTCP --- UDP
client RTP_RTCP --- UDP
server RTP_RTCP --- UDP
client *proprietary* --- TCP
client WPIP HTTPS TCP 18443
server FTP --- TCP
server HTTP --- TCP
server TFTP --- TCP
server *proprietary* --- UDP
server SNMP --- UDP
client SNMP --- UDP
Product Specific Attributes
D- A-
Ports Ports
1024 -
Def: Ephemeral Ports (IANA)
65535
0 -
1720 Def: H.225/Q.931
65535
Def: RTP portnumber is negotiated via
H.245. Max 5 connections: RTP starts at
5004 - 0 - <adr> port2/max - 1 down to <adr> port
5013 65534 1/min , RTCP at <adr> port2/max down to
<adr> port 1/min+1
Adm: even port number only
Def: RTP portnumber is negotiated via
5004 - 0 - H.245. Max 5 connections: RTP starts at
5013 65534 <adr>, RTCP at <adr>+1 (=RTP+1).
Adm: even port number only
Def: Attention: The phone is prepared to
handle up to 5 port couples in total. If the
base port is set to 5004 inside the phone,
5008 - 0 - the port range then is 5004 ... 5013. But, in
5013 65534 H4k scenarios, only the upper three couples
(starting from the top) are used: 5012/5013,
5010/5011 and 5008/5009 .
Adm: even port number only
Def: Attention: The phone is prepared to
handle up to 5 port couples in total. If the
base port is set to 5004 inside the phone,
5008 - 0 - the port range then is 5004 ... 5013. But, in
5013 65534 H4k scenarios, only the upper three couples
(starting from the top) are used: 5012/5013,
5010/5011 and 5008/5009 .
Adm: even port number only
4060 Def: CorNet-TC
0 - Def: DLS: Communication interface
65535 workpoints – DLS
21 Def: FTP-Server Control Port
0 -
443 Def: HTTPS
65535
0 -
8085 Def: HTTP optiPoints, HG1500
65535
5100
161 Def: SNMP (Set/Get)
161
Def: SNMP Trap (oP410)
162
HiPath 5000 V7
Remarks
Page - 12 -