ZANKER ZKF 780 Installations & Bedienungsanleitung Seite 6

Take care when frying food in hot oil or fat,
as the overheated splashes could easily
ignite.
When switching on the mains, after installation
or a power cut, it is quite normal for the spark
generator to be activated automatically.
If the burner does not ignite, turn the control
knob to zero, and try again.
Do not keep the control knob pressed for
more than 15 seconds. If the burner does not
light even after 15 seconds, release the control
knob, turn it the "off" position and wait for at
least one minute before trying to light the
burner again.
If the burner accidentally goes out, turn the
control knob to the "off" position and wait
for at least 1 minute before trying to light the
burner again.
6