Werbung
rr-æmysvnsza,v
E
PARTS SET
CAUTION
carefully and fully understand
before commencing
and
follow
the
instructions
in kit).
out of reach of small children.
1
body for painting
to remove any Oil,
rinse well
*Apply
This mark denotes numbers for Tarniya
POLYCARBONATE
PAINTS
'White
Metallic
blue
3.
COLOR
S<ff
•
TAMIYA
'This
body is compatible with the TT-02B and TT-02B MS chassis.
Trimming
*Make
6.5mm hole.
*Cut away.
*Cut away.
(6.5m)
*Make
6.5mrn hole.
Wing
*Make
*Cut away.
Painting body
*Remove
protective film from body and apply markings (j) to@as
below. use markings as a guide for demarcation when painting.
PS-I
6
stickers in numbered order.
denotes nurmber of masking sticker.
(PS-I)
*Paint body from inside with Metallic Blue (PS-16). When paint
has dried, remove masking tape from White areas and paint
with White (PS-I). Apply thin layer of spray paint 2-3 times
keeping
30cm cfstance from body.
*After
paint
has dried,
remove
masking
remaining masking tape.
(5m)
*Make
5mm hole.
3mm holes.
*Cut away.
Paint Lmderside Of wing with Metallic Blue (PS-16).
After paint has dried, remove protective
side.
shown
PS-16
Metallic
uue
ps-16
Metallic
blue
2.
Cut Out masking stickers
Mask off White
Use applied markings as a guide for demarcation. Also mask
off outside surface of body.
(PS-16)
—mz*B
stickers
arxi
84418 RC Dual Ridge MSBody(TT-02B MS) (11054726)
ITEM
84418
TAMIYA
Cut away.
Cut away.
(PS.16) V
film from top
PS-16
Metallic
uue
C)
4
PS-I
(D
and mask Off windows
from inside.
areas using
masking
tape (sold separately).
Werbung
