Herunterladen Inhalt Inhalt Diese Seite drucken

LGB 72255 Bedienungsanleitung Seite 8

Mzs-digital-starter-set
Inhaltsverzeichnis

Werbung

12
7
Züge auf das Gleis stellen. Wagen und Loks gegeneinander
schieben, bis die Kupplungen einrasten.
8
Eine Lok vom Lok-Handy aus anwählen:
- LED-Display zeigt zuletzt gewählte Lokadresse an: „L xx" (xx
= Lokadresse)
- Taste "0" drücken. Anzeige „L --" erscheint.
- Lokadresse zweistellig eingeben (02 für Dampflok, 04 für
Diesellok). Neue Lokadresse „L xx" wird angezeigt.
Jetzt können Sie losfahren! Drehen Sie den Regelknopf
9
nach rechts, um die Lok vorwärts fahren zu lassen, nach links,
um sie rückwärts fahren zu lassen.
Hinweise:
- Lok, Wagen und Gleise in diesem Set sind wetterfest und
können im Freien eingesetzt werden.
- Wenn die Loks zusammenzustoßen drohen, die "STOP"-Taste
drücken (siehe Nothalt unter BEDIENUNG DER MZS-
ZENTRALE).
7
8
9
© DiskArt™ 1988
7
Put the trains on the track. Push the locos and cars
together to couple them.
8
Select a loco with the Loco Remote:
- LED display shows the last selected loco address: "L xx" (xx
= loco address)
- Press the "0" button. Display shows "L --"
- Input two-digit loco address (02 for steam loco, 04 for diesel
loco). New loco address will be displayed "L xx."
Have fun! Turn the control knob on the Loco Remote to
9
the right to move the train forward and to the left to move it
backward.
Hints:
- The locomotive, cars and track in this set are weather-
resistant and can be used outdoors.
- If two locos are about to collide, press the "STOP" button
(see Emergency Stop in the chapter Operation - MTS Central
Station).
7
Placer les trains sur les rails. Atteler les wagons aux loco-
motives.
8
Sélectionner une locomotive avec la télécommande pour
locomotive :
- La DEL indique l'adresse de la dernière locomotive sélec-
tionnée : «L xx» (xx = adresse de la locomotive)
- Appuyer sur le bouton «0». L'afficheur indique «L --»
- Entrer l'adresse à deux chiffres (02 pour la locomotive à
vapeur, 04 pour la locomotive diesel). L'adresse sélectionnée
sera affichée «L xx».
Amusez-vous bien ! Tourner le bouton de commande sur
9
la télécommande pour locomotive vers la droite pour déplacer
le train vers l'avant ou vers la gauche pour le déplacer vers
l'arrière.
Conseils :
La locomotive, les wagons et les rails de ce coffret résistent
aux intempéries et peuvent donc être utilisés à l'extérieur.
Appuyer sur le bouton «STOP» en cas de collision imminente
entre deux locomotives (se reporter à Arrêt d'urgence au chapitre
– Fonctionnement – Poste central SMT).
13

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

70255

Inhaltsverzeichnis