ZUMEX Essential Basic Bedienungsanleitung Seite 23

Selection of the operating mode:
1 Press the MENU key for a few seconds to enter the menu.
2
Select the WORKING MODE option by positioning the cursors
sing ON to confirm your selection.
3
Select the desired working mode, Professional or Self-Service using the cursors
and pressing ON to confirm your selection. Press OFF several times until you
exit MENU.
Configuration
Your Zumex juicer allows you to adjust the parameters according to your preferences.
All adjustments are made at MENU > CONFIGURATION. Press the MENU key for a
few seconds to enter the menu and select CONFIGURATION, press ON to confirm
your selection.
Lighting: Changes the screen brightness level.
On the CONFIGURATION menu select LIGHTING and press ON to confirm your
selection. Adjust the brightness level using the cursors
firm by pressing ON. The changes will be memorised.
Language: Changes the juicer menu language.
On the CONFIGURATION menu select LANGUAGE and press ON to confirm
your selection. Select the language desired using the cursors
confirm by pressing ON. The changes will be memorised.
Offset: Depending on the type of fruit to be squeezed, the value can be adjusted
for its optimum counting.
Select OFFSET and press the ON key and you will be immediately asked for your
PIN. If you don't have one, consult your Technical Service. Then you configure the
desired number using the cursors
press ON to save the changes. This operation must only be carried out under the
supervision of an authorised Technical Service.
Note: Remember that if you press OFF, you will cancel any changes
made before and you will return to the previous menu.
. Once the adjustment has been concluded,
EN
and pres-
. Once adjusted, con-
. Once selected
23