ZUMEX Essential Basic Bedienungsanleitung Seite 37

Fault
The faucet gets blocked
The machine stops every
now and again
Screen does not display
information
The machine is in self-
service mode and won't stop
operating
WARNING:
disconnecting it from the mains. If, after making the checks stated here, the machine
does not work, call the technical service.
Possible cause
The juice has seeds or too much
pulp.
Insufficient ventilation.
Overload.
Alteration to mains systems.
Faucet not fitted or fitted
incorrectly.
Faucet well fitted: possible
internal fault.
Faucet block activated.
Any action to unblock the machine must be carried out by
Correction
Disassemble and clean the faucet
according Fig. 11A.
Check that the appliance's
ventilation grilles are not blocked.
Contact your technical service.
Turn off the machine and turn it
back on again.
Fit the faucet in the manner
indicated in Fig. 11A
Contact your technical service.
Put the block in horizontal
position by pressing the faucet
downwards.
EN 37