to confirm the automatic calibration. The machine will then carry out said
calibration and display the adjusted calibration value. Return to the menu,
pressing OFF.
This option must only be carried out under the supervision of the Technical
Service and when it has been specifically indicated.
Pin: Your juicer has a password so you can access the counters and modify
configuration parameters. The standard programmed PIN is 0000 but you can
personalise this PIN. On the TECHNICAL SERVICE menu select PIN and press
ON to confirm your selection. If this is the first time you have changed your PIN,
the standard PIN 0000 will appear and press ON; if you have already program-
med a password previously, enter the old password, use the cursors
each digit, press OFF to move from digit to digit and ON to confirm the password.
Upon entering the correct PIN the "New PIN" screen will appear. Programme the
new password, select each digit with the cursors
digit to digit and ON to confirm the new PIN.
If you forget the Pin number programed, you will be required to reset machine's
MENU. In order, to do that, enter CONFIGURATION press
pressed, press
button simultaneously.
Counters: You can control the counter and discounter of your juicer. The counter
allows you to establish the no. of oranges squeezed, the discounter function
allows you to programme a given no. of oranges and gradually consume oranges
from this total.
Partial counter: This shows you the no. of oranges consumed and it can be set
to zero. On the TECHNICAL SERVICE menu select COUNTERS > PARTIAL
COUNTER and press ON to confirm your selection. Enter your PIN (Remem-
ber: Select each digit with the cursor
digit and ON to confirm the password). You can view the number of oranges
squeezed on the screen. To set the counter to zero press
ON and on the machine display you will see that the counter has been set to
zero. Return to the menu, pressing OFF repeatedly.
Total counter: This shows you all the oranges consumed throughout the life of
the juicer, this counter cannot be deleted.
, press OFF to move from
button, and while
, press OFF to move from digit to
and confirm using
EN
25
to select