ZUMEX Essential Basic Bedienungsanleitung Seite 22

As a general rule, to operate within the menu, we can regard the "ON" button as
accept and "OFF" as cancel.
Operating Modes with Zumex Essential Pro
Zumex Essential Pro can work in two operating modes:
Autostart: The machine detects the oranges in the feeder tube and starts up as
the oranges pass by.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or by activating the switch lever; in order to be able to operate
with this switch lever see Fig. 12A and 12B. In this mode you can also work conti-
nuously by turning the faucet block 90º (Fig. 13).
Selection of operating mode:
1
Press the MENU key for a few seconds to enter the programming mode.
2
Select the WORKING MODE option by positioning the cursors
pressing ON to confirm your selection.
3
Select the desired working mode, Autostart or Self-Service using the cursors
and press on to confirm your selection. Press OFF several times until you exit
MENU.
Operating Modes with Zumex Versatile Pro
Zumex Versatile can operate in two working modes:
Professional: You can programme the no. of oranges to be squeezed in each cycle
using the cursors
select the 'c' option to squeeze continuously. The squeezing will start by pressing
'ON' and it will end after ceasing to squeeze the no. of oranges programmed or if
you press 'OFF'.
Self-service: The machine starts up by activating the self-service faucet either by
pressing the faucet or activating the switch lever. You can also work continuously
in this mode by turning the faucet block 90º (Fig. 13).
, and you can programme up to 20 oranges in each cycle or
over it and