Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This nozzle delivers hot water to make tea or
herb teas.
Place a suitable container under the hot water
nozzle. Press the hot water select button once;
To dispense hot water simply, pull or push the
lever as shown in the figure.
By pulling it completely the lever will hold a
position of maximum delivery; by pushing it, the
lever will automatically give way.
The hot water wand will deliver water for the
amount of time equivalent at the time of action
on the lever.
NOTE: Hot water can be delivered at the same
time as coffee.
NOTE: The use of the hot water wand must
always be preceded by the purge of the
hydraulic circuit for at least 2 seconds.
32
4.
CLEANING
NOTE: Cleaning operations must be performed
within the appropriate temperature
range to work safely (+5°, +30°).
NOTE: At the start of the daily activity and any-
way in case there are pauses longer
than 8 hours, one must proceed to
make happen the 100% change of the
water contained in the circuits using the
specific nozzles.
4.1
SWITCHING OFF
Fig. 16
To switch the machine off press the main switch
and set the machine to the "O" energy position.
4.2
CLEANING THE
OUTSIDE OF THE
MACHINE
The machine must be set to "O" power (switch
off and disconnector open) before any cleaning
operations are performed.
Fig. 17
Do not use solvents, chlorine-based prod-
ucts or abrasives.
It is not possible to clean the machine using
water jets or standing it in water.
Cleaning the bottom: To clean all the chromi-
um-plated areas, use a soft, damp cloth.
4.3
Place two spoonfuls of special cleanser in half a
litre of hot water and immerse filter and filter-
holder (without its handle) in it leaving them to
soak for at least half an hour. Then rinse abun-
dantly with running water.
WARNING
WARNING
CLEANING FILTERS
AND FILTER-
HOLDERS
Werbung
