Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
USE
Before starting to use the appliance, the operator
must be sure to have read and understood the
safety prescriptions contained in this booklet.
3.1
SWITCHING THE
MACHINE ON/OFF
Plug the machine into the power socket and
press the switch "A" so it is in position "I", the
machine will switch on.
3.2
ON / OFF CUP
WARMER LIGHTS
(optional)
Turn on lights or automatic cup warmer, by
pressing the switches located next to the main
switch.
30
3.3
MAKING COFFEE
1) After commissioning the machine, insert the
desired filter (single or double inside the fil-
ter holder).
2) Fill the filter with coffee appropriately
ground.
A
Fig. 5
3) Press the coffee in the filter uniformly using
the appropriate presser.
NOTE: Before to insert the filter holder, the
group must be purged for at least 2
Fig. 6
seconds to refresh the water present in
the circuit, turning on and off the supply.
4) Clean the edge of the filter of coffee resi-
dues and insert the filter holder into the
dispensing unit.
01
Fig. 7
5) Position the cup/s under the spout/s.
6) Pulling, up to the stop, the lever of the
Fig. 8
group, in which the filter holder has been
inserted, towards the front of the machine.
Fig. 9
7) Wait a few seconds for a possible prebrew-
ing extraction.
02
Fig. 10
Fig. 11
Fig. 12
Werbung
