SAFETY INDICATIONS
The present manual is an integral and
essential part of the product and is to be
delivered to the user. Carefully read all
warnings in the manual as they provide
important information required to install,
use and maintain the unit safely.
Keep this manual in a safe place for further
consultation.
The illustrations in this manual are pure-
ly indicative. The machine in your pos-
session may differ in some part, from
that represented.
Simonelli Group reserves the right to
make changes to the production and
manual without any obligation to update
the production and the previous manual.
After having removed the packaging,
make certain that the unit is not dam-
aged in any way.
If you have any doubts, do not use the
unit and contact a professionally quali-
fied person. Always keep all packaging
(plastic bags, polystyrene foam, nails,
etc.) out of the reach of children as they
are a potential source of danger and
never loiter the environment with such
materials.
DANGER OF POLLUTION
Before turning on the unit make certain
that the rating indicated on the label
matches the available power supply.
The plate is visible in the upper part of the
machine, on the rear wall.
The machine must be installed accord-
ing to the applicable federal, state and
local standards (codes) in force with
regard to plumbing systems including
back-flow prevention devices. For this
reason, the plumbing connections must
be carried out by a qualified technician.
The warranty expires if the characteris-
tics of the power supply do not corre-
spond to the nameplate data.
The manufacturer cannot be held
responsible for any damages incurred if
the system is not grounded.
For electrical safety, this machine
requires a ground system. Contact a
technically certified electrician who
must check that the line electrical capac-
ity is adequate for the maximum capaci-
ty indicated on the unit label.
The qualified electrician must also check
that the section of the installation's
cables is large enough for the absorbed
power of the appliance.
Never use adapters, multiple jacks or
extension cords. When such items prove
absolutely necessary, call in a qualified
electrician.
When installing the device, it is neces-
sary to use the parts and materials sup-
plied with the device itself. Should it be
necessary to use other parts, the installa-
tion engineer needs to check their suita-
bility for use in contact with water for
human consumption.
The installer must Make the hydraulic
connections respecting the rules of
hygiene and water safety to environ-
mental protection in force in the place of
installation. So for the hydraulic plant
contact an authorized technician.
Always utilise the new hose supplied for
connection to the water supply. Old
hoses must not be utilised.
The device needs to be supplied with
water that is suitable for human con-
sumption and compliant with the regula-
tions in force in the place of installation.
The installation engineer needs confir-
mation from the owner/manager of the
system that the water complies with the
requirements and standards stated
above.
This unit must only be used for the pur-
poses described in the present manual.
The manufacturer cannot be held
responsible for any damages caused by
improper, mistaken and unreasonable
use.
19