Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTION
INFORMATION TO THE
USERS
Under the senses of the
Directives/
2011/65/EU concerning
the reduction of the use
of dangerous substances
in electric and electronic equipment, as
well as the disposal of wastes".
The symbol of the crossed large rubbish
container that is present on the machine
points out that the product at the end of its
life cycle must be collected separately from
the other wastes. The user for this reason
will have to give the equipment that got to
its life cycle to the suitable separate waste
collection centres of electronic and electro-
technical wastes, or to give it back to the
seller or dealer when buying a new equip-
ment of equivalent type, in terms of one to
one.
The suitable separate waste collection for
the following sending of the disused equip-
ment to recycling, the dealing or handling
and compatible environment disposal con-
tributes to avoid possible negative effects
on the environment and on the people's
health and helps the recycling of the mate-
rials the machine is composed of. The
user's illegal disposal of the product implies
the application of administrative fines as
stated in Law Decree n.22/1997" (article 50
and followings of the Law Decree
n.22/1997).
22
SHIPPING AND HANDLING
MACHINE ID
When communicating with the manufacturer
Simonelli Group, always cite the machine ID
number.
Guidelines
Mod.
S.N.
50 60 H
Operating Pressure 0.165 MPa
The machine is transported on pallets contain-
ing several machines inside cartons strapped to
the pallet.
Operators performing any shipping or handling
operations must:
•
Wear gloves, safety shoes and overalls
with elasticized cuffs.
Always move pallets using adequate equipment
(i.e. fork lift trucks).
DANGER OF IMPACT OR PINCHING
Slowly lift the pallet approximately 30
cm off the ground and drive to the load-
ing zone. After having made certain that
there are no obstacles, things or per-
sons in the way, proceed with loading.
Once the destination has been reached,
again using adequate lifting equipment
(i.e. fork lift truck) and after having made
certain that there is nothing and no one
in the unloading area, set the pallet on
the ground and move it to the storage
area; always carry the load at a height of
approximately 30 cm from the ground.
Before performing the following opera-
tions, make certain that the load is in
stable and will not fall when the straps
are cut.
Wearing gloves and safety shoes, the
operator must cut the straps and store
the product. During this operation, see
Date
P= 5400 W
the product technical features for the
weight of the machine being stored and
Max Inlet Pressure 0.65 MPa
proceed as necessary.
CAUTION
Once the machine has been released
from the pallet or container, do not pol-
lute the environment with these items.
CAUTION
DANGER OF IMPACT OR PINCHING
DANGER OF POLLUTION
Werbung
